For Garden

Shed and Fence Preserver

Description

Protect you wood from rot, decay, wood burrowing insects and wood discolouring fungi like blue stain. Our Shed and Fence Preserver protects against woodworm, adds colour and waterproofs your wood so it stays protected and looks good too.

  • An all-in-one formula to preserve and prevent
  • Superb colour and preservation for long lasting protection
  • Preserves, prevents rot and decay
  • Protects against woodworm attack and re-infestation
  • Waterproofs to prevent water ingress
  • Highly penetrative wood preserver
FIND A STOCKIST
Coverage Calculator

How much preserver do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Area Height
Area Width
Use for the following wood types
  • Exterior wood
    Exterior wood
  • Rough sawn wood
    Rough sawn wood

5 colours available including:

Autumn Brown

Black

Dark Brown

Green

Light Brown

How to use Shed and Fence Preserver

Before you start

  1. Make sure the surface you’re protecting is clean, dry and free from paint, varnish or stain. Use a stiff brush to remove ingrained dirt. If you notice any mould, fungi or algae, use a garden cleaner to get rid of it.
  2. If there is paint, varnish and stain on your wood, you will need to strip it or sand it away.
  3. Decayed wood should be replaced with healthy timber. Replace at least 45cm past the rotted area to get the best results.

Application

  1. Give the tin a good shake so you get a consistent colour.
  2. For the end grains of your fence, dip them into the preserver so the wood is completely soaked.
  3. For the main sections of your fence panels, dip a brush and apply the stain.
  4. Wait 24 hours for the first coat to dry. You will need three coats for the best protection. Leave 24 hours between each coat.
  5. Avoid contact with bitumen, bitumen felt or mastics and plastics.

Low temperature and increased humidity will increase drying time.

Aftercare

The wood will now be protected against rot, decay and woodworm.

You can easily maintain your wood by applying another coat every year.

Cleaning

  1. Scrape as much preserver off your brush as you can.
  2. Clean the brush with a paint brush cleaner.

Don’t empty leftover preserver into drains or watercourses. Contact your local authority for more information on how to dispose of unused paint.

Technical specification

Usage: Outdoor sheds and fences
Coverage: Up to 9.6m2 per litre
Dry time: 24 hours
Coat time: 24 hours
Number of coats: Three
Colours: Light Brown, Dark Brown, Autumn Brown, Green, Black
Finish: Matt
Durability: Protects and prevents rot, decay and woodworm.
Application: Brush
Preserver base: Water
Sizes: 5L
VOC: High