Multi-Purpose Wood Treatment
Multi-Purpose Wood Treatment protects all interior and exterior wood from rot and insect attacks. It soaks deep into the wood so prevents future infestations from woodworm and other insects. It can also be sprayed so application is quick and easy.
- Long last protection with a clear finish
- Prevents wet and dry rot
- Stops woodworm attacks and infestations
- Protects against insect attacks
- Can be painted over with paint, stain, oil or varnish
- Stops woodworm attacks
- Protects against wet and dry rotten wood
- Re coat in 24 hours
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how mnay litres you'll need to complete your project.
-
Rough sawn wood
Clear
How do I use it?
Two coats
Up to 8m2 per litre
Brush or spray on
How to use Multi-Purpose Wood Treatment
Before you start
The wood needs to be clear and clean before you can treat it. Remove all existing coatings like paint, varnish or stains.
If timbers have rotted and decayed, you will need to cut it out and replace it. To prevent rot from spreading, burn the decayed wood at least 45cm beyond the damaged area.
Application
- Use a brush or sprayer to apply a thin coat to your wood. End grains should be dipped and don’t forget about joints too.
- Wait roughly 24 hours for the first coat to dry.
- Apply the second coat.
- After 48 hours your wood will be ready for varnishing or painting.
Multi-Purpose Wood Treatment is suitable for brand new wood. If you treat it at the beginning, you won’t have to worry about it in the beginning.
Aftercare
Cleaning
Remove as much product from your brush or sprayer as possible and then clean it in warm soapy water.
You should never pour unused treatment down the drain. Instead, contact your local council for information on the proper way to dispose of it.
Maintenance
Multi-Purpose Wood Treatment can be varnished, oiled or painted over. It will protect again all future infestations and put a stop to wet and dry rot.
Â
Technical specification
| Usage: | Interior and exterior rough sawn wood |
| Coverage: | Up to 8m2 per litre |
| Dry time: | Completely dry in 48 hours |
| Coat time: | 24 hours |
| Number of coats: | Two |
| Colours: | Clear |
| Finish: | Gloss |
| Durability: | Prevents wet and dry rot and prevent insect attacks and infestations |
| Application: | Brush or sprayer |
| Base: | Solvent |
| Sizes: | 2.5L, 5L |
| VOC: | Very high |
