Quick Drying Radiator Enamel
If you want to add some colour to your radiators use some gloss or emulsion. Then paint over it with our Quick Drying Radiator Enamel. This'll keep it protected and stop it peeling off.
- Won't scuff or scratch
- Heat resistant
- Won't yellow
Ronseal Quick Drying Radiator Enamel
Our Quick Drying Radiator Enamel provides a heat resistant, clear finish for radiators previously coated with emulsion or gloss. Our quick drying formula adheres directly to the emulsion or gloss coat creating a powerful bond which resists rust.
Before You Start
Always ensure that radiators are turned off and cold before painting. Surfaces should be clean, dry and free from dirt, grease and loose material. Give the area a quick sand and remove any dust. Remember to wear a face mask. Open your doors and windows for ventilation.
Using Your Radiator Enamel
Give the tin a good stir before you start. Apply the first coat evenly and finishing with a vertical stroke.
After 1 hour apply the second coat.
Leave it to dry for 24 hours before you turn the radiator on.
Usage Areas: All interior radiators.
Compatibility: Primed, factory finished and previously painted radiators.
Clean Up: Clean all brushed in warm, soapy water.