Perfect Finish Interior Varnish
Our Perfect Finish Interior Varnish is great if you're looking to save some time. It gets in to those hard to reach places and leaves a perfect finish with no brush marks. The varnish is tough, and you can get it in our natural wood colours.
- It's easy to use
- Dries in just 20 minutes
- Diamond Hard protection
- Comes with our Perfect Finish Pad
6 colours available
It takes no time at all
Ronseal Perfect Finish Interior Varnish
Ronseal Perfect Finish Interior Varnish provides a beautiful, natural finish for doors, skirting, tables, furniture and other wood inside your home.
Before You Start
Make sure the room is warm and well ventilated. Open a door or a window if you need to.
Prep - Bare Wood: Ensure all surfaces are free from oil, grease and wax by wiping down with white spirit. Give the surface a quick sand, making sure you are wearing a face mask and wipe away any dust with a damp cloth. Leave to dry before varnishing.
Prep – Previously Varnished Wood: Ensure all surfaces are free from oil, grease and wax by wiping down with white spirit. Remove any loose, flaking or peeling coatings. Give the surface a good sand, making sure that you are wearing a face mask and wipe away any dust with a damp cloth. Leave to dry before varnishing.
Using Your Varnish
Give the varnish a good stir before and during use.
Assemble the pad as instructed on the lid. Load the pad with varnish and remove the excess on the side of the tub. Apply an even layer in the direction of the wood grain.
Apply 2-3 coats leaving 1 hour between coats.
Before applying the last coat give the wood a quick sand and wipe down with a damp cloth.
Usage Areas: All interior wood.
Compatibility: Bare and previously varnished wood. Not suitable for painted wood.
Clean Up: Clean pad in warm, soapy water.