Our Interior Wax protects like a varnish against knocks, scuffs and scratches. The difference is in the finish - It leaves your wood looking and feeling natural. It goes on with a brush, and unlike other waxes you don't need to buff it. There's no cloth and there's less mess.
This interior wax can be applied to bare or untreated wood - it works well on doors, window frames, floor skirting and furniture.
- You don't need to buff between coats
- It's easy to use
- Dries in just 20 minutes
- Diamond hard protection
8 colours available
It takes no time at all
I have been converted by Convert
Sorry Brushing wax, after hunting high and low for you, i reluctantly had to purchase interior wax, much easier to apply, you don't need as much and the finished product much better. However it is slow from start to finish. That said I will save the half empty tin of brushing wax just in case
Date submitted by: 16 October 2016
loved this stuff by cat
This product gives a lovely natural finish bringing out the grain, paints on quick and easy, two tins did three coats on 6 doors and dried really quickly in between. I will be buying more for my wooden fire surround.
Date submitted by: 07 February 2016
Dislike of product by Brushing wax
Do not like and would not recommend this product.the thicker wax is what i have been using For my staircase and find this the best for the job.puts a better colour and a nicer sheen to the wood.cannot find a replacement.
Date submitted by: 02 December 2015
Ronseal Interior Wax
Ronseal Interior Wax provides colour and protection for your interior wood in a beautiful, natural matt wax finish. Simply brush it on, no buffing required.
Before You Start
Make sure the room is warm and well ventilated. Open a window if you need to.
Prep - Make sure all surfaces are free from wax, grease and oil by wiping down with white spirit. Give it a sand with 120 grit sandpaper and wipe down with a damp cloth. Leave to dry before waxing.
Using Your Interior Wax
Give the wax a good stir before you start. Apply using a brush, along the direction of the grain.
Put on 3 coats, leaving 1 hour in between coats.
Usage Areas: All interior wood.
Compatibility: Bare and previously treated wood.
Clean Up: Clean all brushes in warm, soapy water.