How do I use it?

Areas of use: outside
Smooth Planed Wood.png
Coats
2
Finish
Satin and Gloss
Apply
Brush
Drying time
4 Hours

It takes no time at all

Your surface area

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *


Find THE RIGHT PRODUCT FOR THE JOB
Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood

Ronseal 10 Year Weatherproof Wood Paint
You never need to use a primer with this paint. Not even on bare wood. Weatherproof in just 1 hour. It’s drip resistant and won’t crack, peel or blister for 10 years, guaranteed. It’s the easiest way to keep your outdoor wood looking its best.

Our 10 Year Guarantee
Our 10 Year Weatherproof Wood Paint is guaranteed to last 10 years. So if it cracks, peels or blisters, we’ll refund you the price you paid for the tin.

Before You Start
Make sure the wood is clean, dry and free from dirt, dust & grease. Choose a dry day, above 10°C, when it’s not likely to rain.

Prep - Bare Wood

Start by lightly sanding your wood to give it an even finish. Use 120grit sandpaper and sand in the direction of the woodgrain. Remember to wear a face mask. When the dust has settled, give the area a wipe with white spirit. Fill any holes or cracks with our Multi Purpose Wood Filler. Cover any knots with a knotting solution, to stop them showing through the paint.

Prep - Previously Painted Wood

If your old paint is in good condition give it a light sand with 240grit sandpaper. When the dust has settled, give the area a wipe with white spirit. If your paint is flaking or cracked you’ll need to sand it back to bare wood. The easiest way to do this is with an electric sander. Use 120grit sandpaper and sand in the direction of the woodgrain. It creates a lot of dust, so make sure you wear a face mask. When the dust has settled, give the area a wipe with white spirit. Fill any holes or cracks with our Multi Purpose Wood Filler. For holes and cracks bigger than 5mm use our High Performance Wood Filler. (Be careful preparing any wood that was painted before 1960, as they may be coated with lead paint. For more info give our Technical Services Team a call on 0114 240 9469).

Using our 10 Year Weatherproof Wood Paint
Give the paint a really good stir. Then paint it on with a synthetic brush, in the direction of the woodgrain. Leave it to dry for 4 hours, then put your 2nd coat on. If you’re painting bare wood and you can still see the woodgrain after 2 coats, you’ll need to put a 3rd coat on. Your last coat will be weatherproof in just 1 hour. That’s it, job done!

Usage Areas: All smooth outdoor wood. Don't use on rough sawn fences and sheds.
Compatibility: New or previously painted wood.
Clean Up: Clean all brushes using warm, soapy water.

Maintenance
To keep your wood looking its best, every year, check for any imperfections. If you notice any cracks, blisters or scratches sand off any loose bits. Touch up the area with 2 coats of 10 year Weatherproof Primer & Paint, following the instructions above.