What is TRIFLOW Total Metal Care?

TRIFLOW Total Metal Care is a superior quality metal finish, which provides long lasting protection for metal gates, railings and other metal objects from the ravages of the weather. 

Why Choose TRIFLOW Total Metal Care?

  • No Primer Required

TRIFLOW can be applied directly to all types of ferrous metal, including bare metal, rusty metal or previously painted metal without the use of a primer. For use on galvanised steel or non ferrous metals see "Where can it be used?"

  • Easy Flow Formula

TRIFLOW is specially formulated to be easy to brush on. It does not become sticky on the brush during use.

  • Contains Anti-Corrosion Agents

TRIFLOWs anti-rusting agents continue to work to resist rust formation after application.

  • Drip resistant on vertical surfaces

TRIFLOW resists running and sagging when applied to vertical surfaces. 

How long will it last?

TRIFLOW has been formulated specifically to protect for 5 years in typical weather conditions. 

Where can it be used?

TRIFLOW Total Metal Care can be used on all types of ferrous metals. On non ferrous metal such as aluminium and on freshly galvanised steel, a primer such as TRIFLOW For Priming Galvanised Metal should be used before applying TRIFLOW Total Metal Care For Gates and Railings. 

What sort of finish is obtained?

TRIFLOW is available in a range of smooth colours and hammered metallic finishes. 

How to achieve best results

Make sure the surface is clean and dry. Degrease by wiping over with white spirit. Remove any loose rust with abrasive paper or a wire brush. TRIFLOW can then be applied directly. No primer is required for ferrous metal. For non-ferrous metal see "Where can it be used". 

How to use it

Stir well before and during use. Do not thin. Apply thick even coats. On previously painted metal in reasonable condition 1 thick coat should suffice. On bare metal 2/3 coats are required. Typical dry time is 1 to 2 hours dependent on conditions and thickness of coat applied. Apply further coats within 8 hours or wait 3 days before doing so. Coverage 4-5 square metres per litre. 

Clean Up

Remove as much product from the brush as possible. Wash out brushes in white spirit. Some local authorities have special facilities for the disposal of waste coatings. Do not empty into drains or watercourses. 

Wise Precautions

Special Precautions should be taken during the surface preparation of pre-1960s paint surfaces over wood and metals as they may contain harmful lead. To avoid risk of spillage, always transport in a secure and upright position.

How do I use it?

Areas of use: outside
Drying time
1-2 Hours

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *

Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood