Quick Dry Interior Varnish

Description

Quick drying, tough protection against knocks, scuffs and scratches.

  • 100% dry in 1 hour
  • Recoat in 1 hour
  • Water based
  • For interior wood
  • Available in clear & coloured
Coverage Calculator

How much do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Area Height
Area Width
Use on the following wood types
  • Interior wood
    Interior wood

6 colours available including:

Light Oak

Antique Pine

Dark Oak

Medium Oak

Walnut

Deep Mahogany

How to use Quick Dry Interior Varnish

Before you start

Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the colour.

Application

Use a synthetic brush and apply 3 coats in the direction of the grain. Leave 1 hour between each coat and lightly sand with 240 grit paper before the final coat. It will be 100% cured in 24 hours.

Clean up

Remove any varnish from your brush and wash in warm, soapy water. Don't put left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.

BBA approved