For Garden

Total Wood Preserver

total-wood-preserver-5l-col-2010.png
Description

Ideal for sheds and fences, our Total Wood Preserver prevents rot, decay and wood discolouring fungi. It also protects against woodworm infestation so your wood stays healthy.

  • Colours and preserves wood
  • Preserves rough sawn or smooth planed exterior wood
  • Water repellent formula but not waterproof
  • Prevents rot and decay
  • Protects against woodworm attack and infestation
FIND A STOCKIST
  • Prevents rot and decay
  • Water repellent
  • Protects against woodworm
Product Image
Coverage Calculator

How much preserver do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how mnay litres you'll need to complete your project

Use for the following wood types
  • Rough sawn wood
    Rough sawn wood
  • Smooth planed wood
    Smooth planed wood

4 colours available including:
Dark Brown

Dark Brown

Green

Green

Light Brown

Light Brown

Clear

Clear

How do I use it?

Number of coats

Two coats

Coverage

Up to 9.6m2 per litre

Application

Brush on

How to use Total Wood Preserver

Before you start

  1. Make sure the surface is clean and dry. Use a stiff broom to get rid of any ingrained dirt.
  2. If you have mould, algae or fungi, use a garden cleaner to get rid of them.
  3. Decayed wood should be strengthened with a wood hardener.
  4. If there is any paint, stain or varnish on the wood you will need to remove it. You can do this with a stripper or sanding the surface.

Application

  1. Give the tin a good shake to mix the colour pigments.
  2. Dip the end grains into the preserver so it completely soaks into the wood.
  3. Use a brush to apply preserver to the rest of the wood.
  4. Wait 24 hours for the first coat to dry.
  5. Add a second coat, following the same process.
  6. If you need to carry out any repairs or gluing, wait until the second coat is totally dry.

Aftercare

To keep your wood in a good condition, apply a new coat every year.

Cleaning

  1. Remove as much excess product off your brush as you can.
  2. Clean it with a brush cleaner

You should never empty left over preserver into drains or watercourses. To find out how to properly dispose of your leftovers, contact your local council.

Technical specification

Usage: Exterior wood like sheds and fences
Coverage: Up to 9.6m2 per litre
Dry time: 24 hours
Coat time: 24 hours
Number of coats: At least two coats
Colours: Light Brown, Dark Brown, Green, Clear
Finish: Matt
Durability: Prevents rot and decay and protects against woodworm
Application: Brush
Sizes: 2.5L, 5L
VOC: High