For Garden

One Coat Fence Life

fence_life.png
Description

Just one coat will protect your shed or fence from rain and prevent it greying in the sun. Despite the name, One Coat Fence Life can be used on any rough sawn wood so it’s suitable for sheds too. Available in a range of colours, it protects and colours your wood, keeping it looking great.

  • 100% showerproof in one hour
  • Keeps its colour for up to two years
  • Protects your wood from greying
  • Can be brushed or sprayed
  • Comes in a range of natural colours
FIND A STOCKIST
  • Only need 1 coat
  • Showerproof in 1 hour
  • Protects your wood from graying
Product Image
Coverage Calculator

How much paint do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use for the following wood types
  • Rough sawn wood
    Rough sawn wood

New or previously stained rough sawn wood.

6 colours available including:
Red Cedar

Red Cedar

Harvest Gold

Harvest Gold

Medium Oak

Medium Oak

Tudor Black Oak

Tudor Black Oak

Dark Oak

Dark Oak

Forest Green

Forest Green

How do I use it?

Number of coats

One coat

Coverage

6m2 per litre. 5L will cover up to 6 fence panels

Application

Brush or spray on

What to use it on?

New or previously stained rough sawn wood

How to paint your fence

Before you start

You can’t use this stain on decking, garden furniture or other smooth planed wood. We have other products to help you with that.

Cold wet weather stops the stain from drying and could wash it off. So make sure it’s a warm day with the temperature above 10°C and no rain is forecast.

The wood needs to be clean and dry so the stain can soak in properly. To clean the wood, use a stiff brush to get rid of any dirt.

If you want to cover up a bright, strong or contrasting colour, you’ll need to use extra coats. This stain is safe to use around plants and pets.

Application

You can either brush or spray your stain.

Brushing

  1. Get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far.
  2. After one hour, it will be 100% showerproof. It takes 4 hours to dry fully.
  3. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one.

Spraying

  1. Pour the liquid into the tank.
  2. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish.
  3. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.

Aftercare

Maintenance

Regularly inspect your wood for signs of damage. If you notice any, just apply another coat of the stain to protect the wood.

Cleaning

Remove as much stain off your brush as possible and then clean them in warm soapy water.

You should never pour the leftover stain down drains or watercourses. Instead, contact your local council for ways to safely dispose of it.

Technical specifications

Usage New or previously stained rough sawn wood
Coverage 6m2 per litre. 5L will cover up to 6 fence panels
Dry time Rainproof in one hour, completely dry in four hours
Coat time Four hours, if necessary
Number of coats One
Colours Harvest Gold, Red Cedar, Medium Oak, Dark Oak, Forest Green, Tudor Black Oak
Finish Matt
Durability Protects from rain and won’t grey in the sunshine so colour lasts for up to two years
Application Brush or spray
Sizes

5L, 9L

VOC

Low

How to guides

Easy to follow steps to help you do a professional job on any DIY project.
trellis.jpg
HOW-TO How to attach trellis to a wall or fence
garden paint.jpg
HOW-TO How to use Ronseal Garden Paint
Ronseal Fence Medium Oak.jpg
HOW-TO How to build and paint a fence
See More