Ultra Tough Floor Varnish Trade


Tough, long lasting protection against knocks, scuffs and scratches.

  • Tough protection
  • Recoat in 2 hours
  • Water based
  • For interior wooden floors
  • Recoat in 2 hours
  • Water based
  • Tough protection

Buy Online

Product Image
Coverage Calculator

How much do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use on the following floor types
  • Wooden floors
    Wooden floors

1 colour available including:


How to use Ultra Tough Floor Varnish

Before you start

Sand the wood well with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the finish.


Use a 4" brush and apply 3 coats. Leave 2 hours between each coat and lightly sand using 240 grit paper before the final coat. Leave 8 hours before walking on the floor and 24 hours before putting any furniture back.

Clean up

Remove any varnish from your brush and wash in warm, soapy water. Don't put left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.

BBA approved

Find the right product

Tell us about your DIY project and we’ll show you which products you need.

Use product finder
Ronseal Tin
Ultra Tough Floor Varnish Trade
Find a stockist Buy online