Multi Purpose Powder Smooth Finish Filler
Description
Product features
- Fill holes up to 40mm deep
- Comes with a measuring scoop and applicator
- Dry in one to two hours
- Suitable for interior and exterior use
- Minimal prep needed
Data sheets
| Usage | Interior or exterior surfaces including plaster, stone, concrete and wood. |
| Dry time | One to two hours |
| Coat time | One to two hours |
| Number of coats | One for holes smaller than 40mm, several for holes over 40mm. |
| Colours | White |
| Finish | Matt |
| Durability | Fills deep holes and leaves a tough repair that won’t shrink or crack |
| Application |
Flat scraper |
| Filler base | Water |
| Size | 500G, 1KG, 2KG |
| VOC | Minimal |
How do the colours look?
Use on...
There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.
- Using the measuring scoop, mix two parts filler to one part water.
- Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
- Before it dries, smooth it with a wet knife.
- If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.
After one to two hours, you’ll be able to redecorate over the filler.
Cleaning
Tools can all be cleaned in warm, soapy water.
Most of our wall fillers are ready mixed, so you can get straight on with the repair. But you can get our Multi Purpose Wall Filler as a powder, than needs mixing, great for larger jobs.
The Quick Drying Filler comes in 100g tube, 330g tube & 600g tub to suit all project sizes.
Yes. Our Smooth Finish Fillers leave a great finish, but for the best results you will need to give it a light sand before decorating.
Our Multi Purpose Filler works on plaster, stone, concrete and wood. And you can use in inside or out.