Ultra Tough Floor Varnish
Tough, long lasting protection against knocks, scuffs and scratches.
- Tough protection
- Recoat in 2 hours
- Water based
- For interior wooden floors
This product has been approved by the BBA.
To find out more about this organisation follow this link.
Ronseal Ultra Tough Floor Varnish
Tough, water based varnish. Long lasting protection against knocks, scuffs and scratches.
Sand the wood well with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the finish.
Use a 4" brush and apply 3 coats. Leave 2 hours between each coat and lightly sand using 240 grit paper before the final coat. Leave 8 hours before walking on the floor and 24 hours before putting any furniture back.
Remove any varnish from your brush and wash in warm, soapy water. Don't put left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.