Ronseal Quick Dry Interior Varnish

Quick drying, tough protection against knocks, scuffs and scratches.


Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the colour.


Use a synthetic brush and apply 3 coats in the direction of the grain. Leave 1 hour between each coat and lightly sand with 240 grit paper before the final coat. It will be 100% cured in 24 hours.

Clean Up:

Remove any varnish from your brush and wash in warm, soapy water. Don't put left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.

How do I use it?

Areas of use: outside

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *

Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood