Ronseal Polyurethane Varnish

Traditional, solvent based varnish. Tough protection against knocks, scuffs and scratches.


Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Make sure the room is ventilated. Stir well before use and test on a small area to check you are happy with the finish.


Use a brush and apply 3 coats in the direction of the grain. Leave 6 hours between each coat and lightly sand with 240 grit paper before the final coat.

Clean Up:

Remove any varnish from your brush and wash in white spirit. Don't put any left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.



How do I use it?

Areas of use: outside

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *

Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood