Ronseal Fencing Stain

Adds colour and weather protection to sheds and fences in just one coat. Increased wax for superior water repellency and UV protection for long lasting colour.  


Make sure the wood is clean and dry and don't use in temperatures lower than 10°C. Stir well before use and test on a small area to check you are happy with the colour. 


Using a Brush: Put lots of stain on the brush and apply a thick , even coat. One coat will do the job but if the wood is a contrasting colour or very weathered a second coat can be put on. 

Using a Sprayer: Pour the stain into the sprayer. Pump it up or turn it on and start spraying. For an even finish use long, sweeping arm movements and move along the full width of the panel. Drop down and do the same again going over where you have already sprayed by 50%.

Clean Up:

Remove any stain from your brush and wash in warm, soapy water. Don't put any left over stain down the drain or into watercourses. Your local authority may have facilities  to get rid of unused stain. 

How do I use it?

Areas of use: outside

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *

Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood