Ultra Tough Floor Varnish

Description

Tough, long lasting protection against knocks, scuffs and scratches.

  • Tough protection
  • Recoat in 2 hours
  • Water based
  • For interior wooden floors
Coverage Calculator

How much do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Area Height
Area Width
Use on the following floor types
  • Wooden floors
    Wooden floors

1 colours available including:

Clear

How to use Ultra Tough Floor Varnish

Before you start

Sand the wood well with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the finish.

Application

Use a 4" brush and apply 3 coats. Leave 2 hours between each coat and lightly sand using 240 grit paper before the final coat. Leave 8 hours before walking on the floor and 24 hours before putting any furniture back.

Clean up

Remove any varnish from your brush and wash in warm, soapy water. Don't put left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.

BBA approved