For Home

Polyurethane Varnish Trade

trade-polyurethane-hardglaze-varnish.png
Description

Traditional, solvent based varnish. Tough protection against knocks, scuffs and scratches.

  • Clear finish
  • Recoat in 6 hours
  • Solvent based
  • For interior wood
  • Available in Mattcoat, Satinglaze, Hardglaze
FIND A STOCKIST
  • Recoat in 6 hours
  • Solvent based
  • For interior wood

Buy Online

Product Image
Coverage Calculator

How much do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use on the following wood types
  • Interior wood
    Interior wood

1 colour available including:
Clear

Clear

Ho to use Polyurethane Varnish

Before you start

Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Make sure the room is ventilated. Stir well before use and test on a small area to check you are happy with the finish.

Application

Use a brush and apply 3 coats in the direction of the grain. Leave 6 hours between each coat and lightly sand with 240 grit paper before the final coat.

Clean up

Remove any varnish from your brush and wash in white spirit. Don't put any left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.

BBA approved

Find the right product

Tell us about your DIY project and we’ll show you which products you need.

Use product finder
Ronseal Tin
Polyurethane Varnish Trade
Find a stockist Buy online