Xactly Exterior Paint
Formulated for outdoor use, Xactly Exterior paint provides all-year, all-weather protection for your woodwork and more. Choose between Paint or Stain. Use our paint product on your metal, brick and terracotta to add a long-lasting pop of colour to your garden. Featuring our best-ever formula, it prevents cracking, peeling and splitting on your exterior surfaces. You can refresh railings or fix up furniture with just one can. Pick from three sizes - 236ml, 750ml and 2.5L.
- All year, all weather protection
- Ideal for wood - Paint also ideal for metal, brick and more
- 10 year guarantee on wood
- Prevent cracking, peeling and splitting
- Long-lasting colour with low odour and VOCs
Buy Online
RX14
RX14
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
How much stain do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
-
Smooth planed wood
-
Metal
-
Brick
-
Terracotta
All new or coated smooth planed exterior wood, metal, brick and terracotta
Porcelain White
Fawn Brown
Warm Yellow
Mustard Yellow
Amber Orange
Burnt Orange
Pale Aqua Green
Topaz Green
Seedling Green
Muted Green
Oregano Green
Hunter Green
Tropical Green
Cool White
Frosty Blue
Robin's Egg Blue
Surf Blue
Dusky Blue
Deep Sea Blue
Starling Blue
Evening Blue
Soft Purple
Dusty Purple
Brisk Violet
Amethyst Purple
Dusky Pink
Orchid Pink
Primrose Pink
Humble Red
Lava Red
Auburn Red
Cotton Beige
Moose Brown
Toasted Brown
Almond Brown
Penny Brown
Spice Brown
Sienna Brown
Russet Brown
Rich Brown
Antique Brown
Cocoa Brown
Umber Brown
Mushroom Beige
Owl Grey
Shallow Grey
Rhino Grey
Moonlight Grey
Skyscraper Grey
Thunderstorm Grey
How do I use it?
3 coats
Brush
Rainproof in 1 hour
All new or coated smooth planed exterior wood, metal
How to use Xactly Exterior paint
Before you start
Choose a warm, dry day (above 10ᵒC). Make sure the surface is clean, dry and clear from dirt, dust and grease.
Bare wood
Lightly sand the wood to give it an even finish. Use 120 grit sandpaper and sand in the direction of the woodgrain. Remember to wear a facemask. Clean up dust and wipe down with a damp cloth. Fill any holes or cracks with our Wood Filler.
Previously painted wood
If your previously painted wood is in good condition, then you'll need to give it a sand using 120 grit sandpaper, making sure there are no loose or flaking coatings. Make sure you wear a facemask and wipe down the surface with a damp cloth. Fill any holes or cracks with our Wood Filler.
Metal, brick & terracotta
If the surface has been previously painted, give it a light sand using 120 grit sandpaper and remove any loose or flaking coating. Make sure you use a facemask and wipe down the surface with a damp cloth. Bare metal surfaces will need to be primed with a suitable metal primer before painting.
Application
Give the tin a really good stir. Check you're happy with the colour by finding a small area to try it on. When painting wood, always paint in the direction of the woodgrain.
You'll need to put on 3 coats. Leave 4 hours between each coat. Give the surface a light sand with 240 grit sandpaper and wipe away any dust with a damp cloth before putting on the last coat. This coat will be rainproof in 1 hour.
Completion
Take as much of the coating off your brush as you can and then wash in warm, soapy water. Don't empty any left over product into drains or watercourses. Your local authority may have special ways to get rid of waste coastings.
How to use Stain
Before you start
Choose a warm, dry day (above 10ᵒC). Make sure the surface is clean, dry and clear from dirt, dust and grease.
Bare wood
Lightly sand the wood to give it an even finish. Use 120 grit sandpaper and sand in the direction of the woodgrain. Remember to wear a facemask. Clean up dust and wipe down with a damp cloth. Fill any holes or cracks with our Wood Filler.
Previously painted wood
You'll need to sand back to bare wood. Use 120 grit sandpaper and sand in the direction of the woodgrain. Make sure you wear a facemask and wipe down the wood with a damp cloth. Fill any holes or cracks with our Wood Filler.
Previously stained wood
If the previous coating is in poor condition with any signs of peeling or flaking then you'll need to sand it back to bare wood. If it's in good condition then just give the wood a good sand with 120 grit sandpaper. Remember to wear a facemask. Clean up any dust and wipe down with a damp cloth.
Application
Give the tin a really good stir. Check you're happy with the colour by finding a small patch of wood to try it on. Brush it on with a synthetic brush in the direction of the woodgrain.
You'll need to put on 3 coats. Leave 4 hours between each coat. Give the surface a light sand with 240 grit sandpaper and wipe away any dust with a damp cloth before putting on the last coat. This coat will be rainproof in 1 hour.
Completion
Take as much of the coating off your brush as you can and then wash in warm, soapy water. Don't empty any left over product into drains or watercourses. Your local authority may have special ways to get rid of waste coastings.
Find the right product
Tell us about your DIY project and we’ll show you which products you need.
