Ronseal Quick Drying All Surface Paint

Our Quick Drying All Surface Paint provides long lasting protection to surfaces around the home. It's an ultra tough, water resistant barrier that protects surfaces against everyday knocks, scuffs and scrapes. 

Before You Start

Prep - Tiles: Clean tiles thoroughly with bleach. Clean grout lines with Ronseal Grout Cleaner if mould is present. Wipe down tiles with a lint free cloth and repair any grout before painting. 

Prep - Cupboards: Thoroughly sand down the surfaces and wipe with white spirit. 

Prep – Bare Wood: Lightly sand to remove any loose fibres and wipe clean. Fill any holes or cracks with our Multi-Purpose Wood Filler

Prep - Metal: Prime all bare metal with a rust preventative primer. Sand down with a fine grade wet and dry sandpaper and leave to dry.

Prep - uPVC: Lightly sand the surface and remove any dust.

Prep - Previously painted surfaces: Lightly sand the surface to get rid of any loose paint and wipe down with white spirit.

Using Your Paint

1. Prime all surfaces using the Ronseal Quick Drying All Surface Primer & Undercoat

2. Mask surrounding areas to avoid overspraying. 

3. Shake can until you hear a rattle then continue for 1 minute.

4. Hold the can 20-30cm away from the surface spraying in a sweeping motion. 

5. Apply 2-3 coats, leaving 30 minutes between coats. 

Usage Areas: All surfaces including tile, wood, metal and uPVC
Compatibility: Bare and previously painted surfaces
Clean Up: Turn can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.

How do I use it?

Areas of use: Indoors
All Interior Surfaces.png
Drying time
10 Minutes

It takes no time at all

Your surface area

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Do you recommend this product *

Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood