Stain Block Aerosol
More images
Our Quick Drying Stain Block permanently stops household stains showing through your paint. It blocks just about anything, including crayon, red wine and dirt. (But for damp stains you’ll need our Damp Seal).
Product details
- Quick Drying
- No brushes to clean
- Needs 2-3 coats
- Paint over in 4 hours
1 colours available
Ronseal Stain Block Aerosol
Our Stain Block is a unique basecoat that will permanently block your household stains from coming through your paintwork.
Before You Start
Make sure your room is above 10°c. Open your doors and windows for ventilation. Put down dust sheets to protects anything you don't want to get paint on and mask the surrounding areas to avoid overspray.
Using Your Aerosol
Shake the can until you hear it rattle, then keep going for 1 minute. Hold the can upright, 20-30cm away from the wall or ceiling and spray from side to side to get an even finish. Put on 2-3 coats, leaving 10 minutes between each coat.
Leave the paint to fully dry for 24 hours before you start to decorate.
Usage Areas: All interior walls and ceilings.
Compatibility: Bare and previously painted walls and ceilings.
Clean Up: Turn the can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.
Related Products
One Coat Stain Guard Clear Coat
Our One Coat Stain Guard is a clear coat that protects your paint from stains. Ideal for areas that are always getting dirty, marked or stained. You put it over your paint, so once you’re finished that’s it.
