For Home

Multi Purpose Powder Smooth Finish Filler

Multi Purpose Powder Smooth Finish Filler.png
Description

Fill holes in almost any surface including plaster, stone, concrete and wood. Our Multi Purpose Powder has a smooth finish so it’s easy to sand. It’s tough too and won’t shrink or crack.

  • Fill holes up to 40mm deep
  • Comes with a measuring scoop and applicator
  • Dry in one to two hours
  • Suitable for interior and exterior use
  • Minimal prep needed
FIND A STOCKIST
  • Dry in 1-2 hours
  • Comes with applicator
  • Minimal Prep work needed

Buy Online

Use on the following surfaces
  • Interior wood
    Interior wood
  • Plaster
    Plaster
  • Exterior wood
    Exterior wood
  • Interior & Exterior stone & concrete
    Interior & Exterior stone & concrete

1 colour available including:
White

White

How do I use it?

Number of coats

One coat for 40mm gaps. More coats needed if gap is deeper.

Coverage

Up to 40mm gap

Application

Measuring scoop and applicator included

Use it on...

Interior or exterior surfaces including plaster, stone, concrete and wood.

How to use Multi Purpose Powder Smooth Finish Filler

Before you start

There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.

Application

  1. Using the measuring scoop, mix two parts filler to one part water.
  2. Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
  3. Before it dries, smooth it with a wet knife.
  4. If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.

Aftercare

After one to two hours, you’ll be able to redecorate over the filler.

Cleaning

Tools can all be cleaned in warm, soapy water.

Technical Specification

Usage Interior or exterior surfaces including plaster, stone, concrete and wood.
Dry time One to two hours
Coat time One to two hours
Number of coats One for holes smaller than 40mm, several for holes over 40mm.
Colours White
Finish Matt
Durability Fills deep holes and leaves a tough repair that won’t shrink or crack
Application

Flat scraper

Filler base Water
Size 500G, 1KG, 2KG
VOC Minimal

How to guides

Easy to follow steps to help you do a professional job on any DIY project.
wall fillers category.jpg
HOW-TO How to fill a hole in your wall
choose the right filler.jpg
HOW-TO How to choose the right filler for the job
See More

Find the right product

Tell us about your DIY project and we’ll show you which products you need.

Use product finder
Ronseal Tin
Multi Purpose Powder Smooth Finish Filler
Find a stockist Buy online