For Home

Perfect Finish Interior Varnish

Description

Varnish your interior wood in next to no time at all and give it diamond hard protection. Easy to use, dries in just 20 minutes and will protect your wood while making it look great too.

  • Diamond hard protection with a great finish
  • Ideal for hard to reach places
  • Covers up to 24m2
  • Great for doors, skirting boards, tables and furniture
  • Comes with a Perfect Finish pad for easy application
  • Dries in only 20 minutes
FIND A STOCKIST
Coverage Calculator

How much varnish do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Area Height
Area Width
Use for the following wood types
  • Interior wood
    Interior wood

6 colours available including:

Antique Pine

Beech

Dark Oak

Medium Oak

Walnut

Clear

How to use perfect finish interior varnish

How to use perfect finish interior varnish

This varnish is perfect for interior wood but not floors. If you’d like to varnish your floor, our Perfect Finish Diamond Hard Floor Varnish will do the job. It’s also not suitable for painted wood – you’ll have to remove that paint before you begin varnishing.

Before you start

Make sure your room is warm and well ventilated. Open a door or window if you need to and don’t forget to wear a mask when you’re sanding wood!

How to prepare wood for varnishing

  1. Use white spirit and a cloth to wipe down your surfaces and remove any oil, grease and wax.
  2. Give the surface a quick sand using 120 grit sandpaper to remove any rough patches. If your wood was previously painted or varnished, sand away any flaking or peeling bits.
  3. Let the dust settle and wipe it away with a damp cloth.
  4. Leave the wood to dry.

Application

  1. Assemble the pad as instructed on the lid.
  2. Give the varnish a good stir to ensure the consistency is nice and smooth.
  3. Load up your pad with varnish and remove the excess by wiping it on the side of the tub.
  4. Apply an even layer of varnish going in the direction of the woodgrain.
  5. Wait one hour for the first coat to dry before applying a second.
  6. If you’re happy with how it looks after two coats, you can stop there. Otherwise wait an hour and apply the third.
  7. Before you apply your final coat, give the wood a quick sand and wipe down the dust down with a damp cloth. This will give you a really good final finish.

Aftercare

Cleaning

Once your varnish is dry, you can look after your wood as normal. The application pad can just be cleaned in warm soapy water.

Repair

Our diamond hard protection means that your wood can withstand everyday knocks, scuffs and scratches so it’s unlikely you’ll have to repair it.

But if you do notice a damaged section of your varnish, don’t worry, it’s easy to fix. Simply sand down the section that needs repairing and add a couple of coats of the varnish, following the same steps we’ve talked about above.

Technical Specification

Usage Interior wood excluding flooring
Coverage Up to 24m2 per litre
Dry time 20 minutes
Coat time One hour
Number of coats Two to three
Colours Dark Oak, Medium Oak, Walnut, Antique Pine, Beech, Clear
Finish Satin
Durability Diamond hard protection to cope with knocks, scuffs, spills and scrapes
Application Pad
Varnish base Water
Sizes 0.75L
VOC Low