For Home

Damp Seal Aerosol

Damp Seal Aerosol.png
Description

Ideal if you have a damp patch in an awkward to reach place, our Damp Seal Aerosol takes just 10 minutes to dry and permanently blocks damp stains. There’s no need for paint brushes so the clean-up is easy.

  • A quick permanent fix for damp
  • Can be applied directly to damp surfaces
  • Dry in only 10 minutes
  • Needs 2-3 coats to permanently block damp stains and stopping them from ruining your top coat
  • Can be painted or wallpapered over
  • Suitable for walls and ceilings
FIND A STOCKIST
  • Blocks and seals damp stains
  • Touch dry in 10 minutes
  • Apply direct to damp surfaces
Use on the following surfaces
  • Indoor walls and ceilings
    Indoor walls and ceilings

1 colours available including:
White

White

How do I use it?

Number of coats

Two to three coats

Application

Spray on

Dry time

Completely dry in 24 hours

How to use Damp Seal Aerosol

Before you start

Make sure the room is nice and temperate, above 10°c. Open doors and windows for added ventilation and put down a dust sheet to protect the areas you don’t want to get paint on.

It’s also important to remember that you should address the core problem of the damp before covering it up. If you just choose to paint over it, you won’t solve the problem and the damp will keep coming back.

How to prepare walls for sealing

  1. If damp has caused paint to flake and peel, sand it away so you have a smooth surface.
  2. If you notice any mould, use a mould killer to get rid of it.

Application

  1. Shake the can until you hear it rattle and then keep going for an added minute.
  2. Hold it upright around 20-30cm away for the wall or ceiling.
  3. Spray from side to side for an even finish.
  4. Wait 10 minutes for the first coat to dry.
  5. Apply a second coat and then a third, leaving 10 minutes between both.
  6. Once you have applied three coats, wait 24 hours for the seal to completely dry before you start decorating.

Aftercare

As this damp seal and not intended to be a top coat, it should be painted or wallpapered over.

Cleaning

To clean the nozzle, just turn the can upside and spray for a few seconds. Then wipe the nozzle with a damp cloth.

Technical specification

Usage: All interior walls and ceilings
Dry time: 24 hours
Coat time: 10 minutes
Number of coats: Two to three
Colours: White
Finish: Matt
Durability: Prevents damp from staining and showing through paint or wallpaper
Application: Spray on aerosol
Sizes: 0.4L
See More