For Exterior

Stabilising Solution 5L

Masonry Stabilising Solution 5L DIGITAL.png
Description

Ronseal's Masonry Stabilising Solution seals and stabilises weathered and chalky surfaces. Our quick drying solution creates a perfect base for porous surfaces and ensures better adhesion for painting. Its specially tinted formula helps you track where you've painted for an easier application with no splatter or mess!

  • Seals and stabilises chalky and weathered surfaces
  • Ensures good adhesion of masonry paint
  • Quick drying
  • Colour tinted for easy application
  • Easy to apply
  • Creates a perfect base for weathered masonry
FIND A STOCKIST
  • Colour tinted for easy application
  • Ensures good paint adhesion
  • Seals and stabilises weathered, chalky surfaces
Can be used on the following surfaces
  • Masonry
    Masonry
  • Brick
    Brick
  • Interior & Exterior stone & concrete
    Interior & Exterior stone & concrete

1 colour available including:
Pink Fusion

Pink Fusion

How do I use it?

Number of coats

1 coat

Application

Apply with a masonry brush or roller

When to apply

Don’t apply in humid conditions or direct sunlight

How to use the Ronseal Stabilising Solution

Before you start

Remove all dirt, dust or algae with Ronseal Masonry Fungicidal Wash first to prepare the surface.

Application

We recommend that you apply in temperatures above 10°C, and that you don’t apply the paint in high humid conditions or in direct sunlight. It is ready to go straight from the tub. We recommend a brush, a (masonry) roller or a suitable sprayer. If using a brush or roller, you should apply with a medium loaded roller and apply with low pressure. You should leave at least 4 hours between each coat of paint, depending on weather conditions. If you have any spillages when painting, just clean them up with a wet cloth before the paint dries.

Aftercare

Don’t allow undiluted product to enter drains or watercourses. For information on how to properly dispose of your cleaner, get in contact with your local council.

Technical Specification

Usage:

Rendering, Roughcast, Pebbledash, Concrete, Building Blocks, Facing Bricks, Emulsion or Masonry Painted Surfaces

Dry time: 4 hours
Number of coats: 1
Colours: Pink
Application:

Apply with exterior brush or roller

Base: Water
Sizes: 5L
VOC: Minimal