For Home

One Coat Tile Paint Water Based

One Coat Tile Paint 750ml DIGITAL.png
Description

Our Tile Paint can transform your old tiles in just one coat. You don’t need to use a primer. It’ll stand up to knocks, scuffs and spills, so you won’t have to do it again any time soon.

  • Durable and easy to clean
  • Water resistant
  • Mould resistant
  • Stands up to knocks, scuffs and spills
  • No primer needed
  • One coat
FIND A STOCKIST
  • Durable & easy to clean
  • Water resistant
  • Mould resistant

Buy Online

Product Image
Coverage Calculator

How much paint do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project. It doesn't forget about the coats either.

Use on the following surfaces
  • Interior tiles
    Interior tiles
  • Enamel, porcelain, fibreglass, ceramic
    Enamel, porcelain, fibreglass, ceramic

For interior kitchen tiles & generic wall tiles (including porcelain, ceramic & glass)

8 colours available including:
Black Gloss

Black Gloss

Black Satin

Black Satin

White Gloss

White Gloss

White Satin

White Satin

Granite Grey

Granite Grey

Magnolia Satin

Magnolia Satin

Cobalt Grey Gloss

Cobalt Grey Gloss

Ivory Satin

Ivory Satin

Need to know

Available in 3 modern colours with a glossy finish, our Tile Paint takes next to no time to apply.

Watch video

Quick tip

A quick way to redecorate your bathroom and it’s much easier than you think. Just give your tiles a quick scrub and paint straight on.

Number of coats

1 but 2 might be needed if painting a porous surface

Coverage

Paints up to 8m2 per litre

Application

Roller or brush

Touch dry

1 hour

How to transform your tiles

Before you start

Make sure your room is above 10°C and open a window to keep it ventilated. Cover anything you don’t want to get paint over.

Clean grout with our Grout Cleaner and fix any damaged grout before painting. Then make sure your tiles are cleaned thoroughly to remove all dust, dirt and grease and wipe with a damp cloth.

Application

Give the paint a really good stir. Then paint it on with a synthetic brush. To get the best finish, go up and down, not side to side, on each tile. It’ll be touch dry in just 1 hour, but don’t get it wet for the next 24 hours.

Most of the time one coat is all you ever need. But, if you’re painting over a bold colour you may need a second coat. If this is the case, leave the first coat to dry for 4 hours. Then give it a light sand with 240grit sandpaper and wipe with a damp cloth. Once the surface is dry put the second coat on.

Aftercare

Cleaning

Take off as much paint from your brush or roller as you can. Then wash them in warm soapy water. Don't empty any leftover paint into drains or watercourses. Your local authority may have special ways to get rid of unused paint. Protect from frost.

Maintenance

Avoid abrasive cleaners, these can damage the paint. Clean with soapy water. Don’t get the tiles wet or subject to high humidity for at least 24 hours after painting.

Technical specification

Usage

For interior kitchen tiles & generic wall tiles (including porcelain, ceramic & glass)

Coverage 8m2 per litre
Dry time Touch dry in 1 hour
Coat time

If required, overcoat in 4 hours

Number of coats 1 coat (a second coat may be required if painting onto extremely porous substrates)
Colours

White Gloss, White Satin, Granite Grey Satin

Finish Gloss and Satin
Application Brush or roller
Paint base Water
Sizes 750ml
VOC Low

Find the right product

Tell us about your DIY project and we’ll show you which products you need.

Use product finder
Ronseal Tin
One Coat Tile Paint Water Based
Find a stockist Buy online