For Home

Kitchen & Bathroom Touch-Up Enamel

Description

Cover up ugly chips and grooves in your enamel in no time at all instead of replacing the unit. Our Kitchen & Bathroom Touch-up Enamel comes with everything you need to have your sink, toilet or bath looking good as new.

  • An all-in-one kit for quick repairs
  • Not just for enamel – suitable for porcelain, acrylic, fibreglass and appliances
  • Waterproof finish
  • Complete with a brush applicator for easy use
  • Leaves a long lasting smooth white finish
  • Can be used on flaws, scratches, chips, defects and minor damage
FIND A STOCKIST
Use on the following surfaces
  • Enamel, porcelain, fibreglass, ceramic
    Enamel, porcelain, fibreglass, ceramic

1 colours available including:

White

How to touch up damaged enamel

Before you start

  1. Make sure the area is clean and dry.
  2. Test the enamel on a small, hidden patch to make sure you’re happy with the colour.
  3. If you are happy with the colour, lightly sand the damaged area to get rid of any loose material.
  4. Wipe the area down with a damp cloth and leave it to dry.

Application

  1. Shake the bottle for two minutes before you use it.
  2. Brush on the first coat.
  3. Wait two hours for it to dry.
  4. Apply another one or two coats, leaving two hours between each coat.
  5. After the final coat, wait 24 hours before getting it wet. The area will be touch dry in one hour so don’t worry if you brush up against it. Wait four days before submerging the area in water.

Aftercare

Cleaning

Once the repaired area is completely dry, you can clean it as normal.

Maintenance

Regularly inspect the area for any additional chips or scratches. If you notice any, you just need to clean the area and apply another coat.

Technical specification

Usage Suitable for porcelain, enamel, acrylic, fibreglass and appliances
Dry time 24 hours
Coat time Two hours
Number of coats Two or three
Colours White
Durability Fills chips and scratches to prevent further damage
Application Brush included
Sizes 10ml