For Home

Floor oil

floor-oil-25l-3d.png
Description

Nourish and protect your floor at the same time while bringing out the wood’s natural beauty. Covers 16m2 per litre and dries transparent in only 30 minutes.

  • Brighten up your wood flooring
  • Protects against water spills
  • Emphasises your wood’s natural look with a soft sheen
  • Tough and durable
  • Water resistant
  • Nourishes your wood
FIND A STOCKIST
  • Protects against water spills
  • Tough and durable
  • Natural look with a soft sheen
Product Image
Coverage Calculator

How much oil do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use for the following wood types
  • Wooden floors
    Wooden floors

1 colours available including:
Clear Natural

Clear Natural

How do I use it?

Preparation

Remove any dust or dirt and sand back

Number of coats

Three coats

Coverage

Up to 16m2 per litre

Application

Brush on

How to oil your floor

Before you start

Pick a warm and dry day over 10°c. Be prepared and wear a mask when you’re sanding the floors as there will be a lot of dust.

Preparing a floor for oiling

  1. As you would with any flooring, sand down your wood using 120 grit sandpaper with a floor sander
  2. Let the dust settle before vacuuming it up. Once all the dust is gone, wipe down the floor with white spirit and leave it to dry before oiling.

If you’re topping up a previously oiled floor, just give it a good vacuum and then a wipe down with white spirit.

Application

  1. Load up your brush with oil and apply it in the direction of the grain. Focus on a section of three to four boards to avoid any crossover marks.
  2. Wait 15 minutes for the oil to penetrate the wood and remove any excess with a lint free cloth. Make sure you’ve got the right kind of cloth otherwise you’ll end up with loads of bits in your newly oiled floor.
  3. Wait 30 minutes before applying the next coat and repeat steps one and two. For the best results, you’ll need three coats.
  4. Your floor will be touch dry in just 30 minutes

Aftercare

General cleaning

Once your floor has dried, you can take care of it as normal. Vacuum or sweep up any dirt or grit that could scratch your floor and use a damp cloth to wipe up any spills or scuffs.

Repairing a scratch

If you notice your floor is scratched, simply repeat the steps and cover up the damaged area.

 

Technical specification

Usage Interior
Coverage 16m2
Dry Time 30 minutes
Coat Time 30 minutes
Number of Coats 3
Colours Natural
Finish Soft sheen
Durability Good protection while emphasising natural wood
Application Brush
Oil Base Oil
Size 1L, 2.5L
VOC Very High