For Garden

Multi-Purpose Wood Treatment

MP-Wood-Treatment-5L-2019.jpg
Description

Multi-Purpose Wood Treatment protects all interior and exterior wood from rot and insect attacks. It soaks deep into the wood so prevents future infestations from woodworm and other insects. It can also be sprayed so application is quick and easy.

  • Long last protection with a clear finish
  • Prevents wet and dry rot
  • Stops woodworm attacks and infestations
  • Protects against insect attacks
  • Can be painted over with paint, stain, oil or varnish
FIND A STOCKIST
  • Stops woodworm attacks
  • Protects against wet and dry rotten wood
  • Re coat in 24 hours
Product Image
Coverage Calculator

How much paint do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how mnay litres you'll need to complete your project.

Use for the following wood types
  • Rough sawn wood
    Rough sawn wood

1 colours available including:
Clear

Clear

How do I use it?

Number of coats

Two coats

Coverage

Up to 8m2 per litre

Application

Brush or spray on

How to use Multi-Purpose Wood Treatment

Before you start

The wood needs to be clear and clean before you can treat it. Remove all existing coatings like paint, varnish or stains.

If timbers have rotted and decayed, you will need to cut it out and replace it. To prevent rot from spreading, burn the decayed wood at least 45cm beyond the damaged area.

Application

  1. Use a brush or sprayer to apply a thin coat to your wood. End grains should be dipped and don’t forget about joints too.
  2. Wait roughly 24 hours for the first coat to dry.
  3. Apply the second coat.
  4. After 48 hours your wood will be ready for varnishing or painting.

Multi-Purpose Wood Treatment is suitable for brand new wood. If you treat it at the beginning, you won’t have to worry about it in the beginning.

Aftercare

Cleaning

Remove as much product from your brush or sprayer as possible and then clean it in warm soapy water.

You should never pour unused treatment down the drain. Instead, contact your local council for information on the proper way to dispose of it.

Maintenance

Multi-Purpose Wood Treatment can be varnished, oiled or painted over. It will protect again all future infestations and put a stop to wet and dry rot.

 

Technical specification

Usage: Interior and exterior rough sawn wood
Coverage: Up to 8m2 per litre
Dry time: Completely dry in 48 hours
Coat time: 24 hours
Number of coats: Two
Colours: Clear
Finish: Gloss
Durability: Prevents wet and dry rot and prevent insect attacks and infestations
Application: Brush or sprayer
Base: Solvent
Sizes: 2.5L, 5L
VOC: Very high